Motor Driven Cable Reel
Description:
JQC-I Series of Electromagnetic Coupling Cable Drums are ideal coiling equipments at present, characterized good synchronization
Magnetic Couple Driven Cable Reel JQC Series:
Magnetic Coupling Driven Cable Reel JQC Series adopt Separator Mangetic Coupler as synchronous differential mechanism and make use of Mangetic Couple Principle to guarantee the same rate of the cable deploying& retracting and travelling equipment synchronously. When retracting cables, the separator Mangetic Couple connected with the bush is wheeled by the force through the driven sprocket and force the cable reel to coil the cable vice versa. When the cable speed faster then the travelling speed of the equipment with the increasing of cable layers, slow down the relative differential speed with the Magnetic Couple and the rotational speed of cable reel until the synchronization of cable speed and equipment travelling speed.
The whole coiling is the process of synchronous modulation of the Separator Mangetic Couple continuously. The tensility can be modulated at will through working state regulation of the Separator Mangetic Coupler. When deploying cable, the one-way clutch in the driven sprocket doesn't transfer the force to Magnetic Coupler, the sprocket works with no load, cable reel conquers the Damp because of the inertial rotation to deploy cable synchronously under the pull of the cable. Regulate the cable tensility at will through working state modulation of Damp Magnetic Coupler.
Magnetic Couple Drive Cable Reel JQC Series are ideal coiling equipment at present, characterized good synchronization, which are capable of cable deploying and retracting horizontally as well as vertically & medially.
Main Features and Designation:
-- Adopt Magnetic Coupler as the synchronours differential mechanism with good synchronization and steady property, not affected by the working condition changes.
-- Magnetic Coupler adopts separate structure, cable tensility can be modulated at will, easy operation and cables array in good order.
-- Equipeed with slip ring outside, easy-maintenance and installation, higher reliablity,
-- Ranges of kind and specification, suitable to cables vary from 2.5mm2 to 50mm2.
-- Type JQC-I, with slip ring inbuilt, suitable to tower crane, electric flat car and etc.
Type JQC-II, with slip ring out-built, suitable to door crane, stacker-reclaimer and etc.
-- Set cable 4 cores as example in the dimension drawing. Some what differs for multiple cores.
| JQC-I Slip Ring Built-in type |
| Model |
D1 |
D2 |
H |
Mass(kg) |
| JQC-60-I |
350 |
550 |
290 |
70 |
| JQC-80-I |
350 |
650 |
350 |
80 |
| JQC-120-I |
400 |
750 |
390 |
90 |
| JQC-II Slip Ring Built-out type |
| Model |
D1 |
D2 |
W |
Mass(kg) |
| JQC-100-II |
400 |
1200 |
190 |
120 |
| JQC-150-II |
450 |
1300 |
190 |
150 |
| JQC-200-II |
530 |
1400 |
250 |
170 |
| JQC-250-II |
530 |
1500 |
250 |
180 |
| JQC-300-II |
530 |
1500 |
300 |
190 |
Audited Supplier 
){kind=link}
){kind=link}